Your web browser is no longer supported.
Cigars International is committed to providing you with the best web experience possible.

How to Refill a Butane Lighter (Cigar 101)

29779 views Uploaded by Cigars International on Aug 21 2014, 8:55AM
powered by YouTube

Cigars International shows you the most effective way to refill a butane lighter.

Connect with us:

How to Refill a Butane Lighter

Refilling your butane lighter is a very simple task that can be
completed in just 3 steps.

Step One: Purge the Lighter. Take a small screw driver or paper
clip and press it directly onto the filler pin of the lighter. You should hear a slight hiss. This process should take 30-60 seconds
to complete.

The reason for doing this is because after the lighter depletes
all the butane in the tank, the gas is replaced with air. That air
inside the lighter will prevent more butane from entering the tank.

Step Two: Grab your triple refined butane and turn it upside
down. Then take your lighter and turn it upside down. The reason for this is because, a butane can is made up of two parts, propellant and butane. Propellant is lighter than butane
and rests on top of it. When the can is flipped upside down, the
propellant rises to the top, forcing the butane towards the

Take the nozzle from the butane and insert it into the filler pin of
the lighter. Pressing down on the can will release the butane into
the lighter.

Once the lighter is full, you should hear a slight gurgling sound
and may even see a little butane come out of the filler pin.

Your lighter will be cool to the touch after filling it. It’s best
to let it warm up to room temperature before attempting to
light it.

Step Three: Once your lighter has warmed to room temperature, give it a light and make any adjustments if necessary.

Using your flat head screw driver, turn the adjustment ring to the
positive or negative side depending if your flame is too high or too

Congratulations! Your lighter is now ready to ignite your favorite
premium hand mades!